Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: koep on July 07, 2012, 03:10:29 PM

Title: G-Editor- the Mach3 specific touchscreen keypad/code-editor/numpad
Post by: koep on July 07, 2012, 03:10:29 PM

Hello Everyone!

After getting a touchscreen PC (shuttle X50) I quickly noticed that I am not happy with the available touchscreen keyboards.
So naturally >:D I thought " I can make better myself". As always easier said than done.

After winter long tinkering I'm mostly done and figured I might help someone with similar expectations on how
a workshop touchscreen keyboard should be. ;D

If interested download the GEditor.rar . I hope the set-up instructions make sense to reader since english is not my native language.

In order to limit file size I left installers and .net distributales out. the installation should be pretty easy even
though it is manual.

Happy summer to all :D

Tapio

Title: Re: G-Editor- the Mach3 specific touchscreen keypad/code-editor/numpad
Post by: koep on July 12, 2012, 01:43:15 PM

As an afterthought: please note that Mach3 has to be running when using G-Editor. If G-Editor does not find Mach3 it will shut down/not run.

Rgds,
Tapio