Machsupport Forum

*****VIDEOS***** => *****VIDEOS***** => Topic started by: Tj256 on July 06, 2012, 09:49:11 AM

Title: MaxNC 15 Upgrades: Spindle Motor Replacement
Post by: Tj256 on July 06, 2012, 09:49:11 AM

The stock brushed 10,000 rpm Grainger motor on my MaxNC15 was insane. The brushes kept wearing out, flames occasionally shot out of the motor, and it was freaking loud. My solution was to replace the spindle motor with a servo drive from LeadShine. The video here shows my many upgrades, but focuses on the 400 watt servo motor spindle motor upgrade.

http://youtu.be/VYMddSNP058