Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Ivan_The_Red on June 29, 2012, 07:49:17 PM

Title: Part Offset Touch Button - Strange Behavior - HHHHHmmmmmmm
Post by: Ivan_The_Red on June 29, 2012, 07:49:17 PM

I just created a buttons for "Part X Offset Touch" and "Part Y Offset Touch" using OEM Codes 139 & 140 respectfully. When I use them it removes 1.000" from the work offset DRO's and adds 1.000" to the Coordinate DRO's but only when "Fixture Coordinates" are being displayed, not "Machine Coordinates". Can someone offer some help, almost seems like there is a global variable set somewhere thats taken into account but I can only speculate.......

Thanks

Title: Re: Part Offset Touch Button - Strange Behavior - HHHHHmmmmmmm
Post by: Ivan_The_Red on June 30, 2012, 05:43:39 PM

Rebooted ...... problem solved, but still strange