Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: gtonini on June 25, 2012, 10:40:58 AM

Title: auto zero in home positions not working
Post by: gtonini on June 25, 2012, 10:40:58 AM

Hi I have auto zero turned on in homing limits settings but yet when the machine goes to home position it does not zero the numbers out any ideas why ? Thanks Gary

Title: Re: auto zero in home positions not working
Post by: Overloaded on June 25, 2012, 11:09:18 AM

You are likely viewing the wrong Coord system.
Homing is in Machine Coords.
You must select Machine Coordinates to see that it is zeroed.
If you are in Mach coords, you might have a Home Off value entered which would show in the DRO.

Russ