Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: nzinoz on June 25, 2012, 07:18:22 AM
-
Hi all I'm running a Sieg X3 super converted to cnc using a Promica Kit. I have modified the motor>spindle ratio to now give me 3840 max RPM so the lcd mill reads incorrectly. I have fitted a vista cnc usb optical sensor pdf attached. My problem is it needs a special screen set to pickup reading 1024rpm.set, now I have other screens I would like to use but I can't get RPM's. :'( Could you anyone enlighten as to how I might change other screen rpm dro to suit.
PS. I'm a complete novice ;)
-
They have the DRO set to a user code so you would need to open the screen you wish to change the DRO on in one of the screen editors and change the DRO to the User DRO number they have, it is 2222.
If you attach your screenset you want to use I can quickly change it for you if you wish.
Hood
-
They have the DRO set to a user code so you would need to open the screen you wish to change the DRO on in one of the screen editors and change the DRO to the User DRO number they have, it is 2222.
If you attach your screenset you want to use I can quickly change it for you if you wish.
Hood
Thanks Hood I'll give it a go If I fail I'll be back
-
They have the DRO set to a user code so you would need to open the screen you wish to change the DRO on in one of the screen editors and change the DRO to the User DRO number they have, it is 2222.
If you attach your screenset you want to use I can quickly change it for you if you wish.
Hood
Thanks Again HOOD I managed to figure out how to change the DRO to 2222. I wonder what changed in Mach3 to stop it working on the original setting ??
-
It is not on the standard Mach screens, it is a User DRO and the Vista Plugin must be looking there for some reason.
Hood