Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: jkf59 on June 19, 2012, 10:56:49 PM
-
Hi
I'm new at this. Just got a g 6 table with a mach3 controller.
There's a dialog box for orienting the plate on the table.
I cannot remember the steps to get to it.
Can someone please help?
Thanks for your help
-
Local System Rotated ... Degrees
On the MDI page.
Is that what you are meaning ? ? ?
Russ
-
Hi Russ,
By the way, my name is Joseph.
I was handed a G6 table with a mach3 controller,
with absolutely no instructions.
From day 1 the table has malfunctioned.
We have finally worked through all the mechanical problems with the table.
While waiting on line with Canada, I remember reading something about how to orient
a piece of material on the table without having it straight with the axis of
the table. I recall the basic instructions, 1) locate 1st corner 2) move to another corner and enter the coordinates in a pop-up box telling the machine this is now the other end of the plate.
I know this is extremely vague and I have no background to draw from.
Pretend you're talking to an absolute idiot.
Thank you for taking the time to at least read my post.
HELP IF YOU CAN!!!! ???
-
:)
Hi Joseph,
Here is a cool little Wizard. Might be just what you need.
Unzip it to your Mach3/Addons folder, restart Mach and it should then be in the wizard list.
Welcome aboard,
Russ