Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Guillermo on June 09, 2012, 08:20:21 AM
-
Hi all.
I am searching for building a computer exclusively for running Mach 3 through
paralel port.
I am planing the use of an AMD Sempron 145 2,8 Ghz but have doubts
about the motherboard
There are available in my local market these two Asus models.
http://www.asus.com/Motherboards/AMD_AM3/M4N68TM_LE_V2/ and
http://www.asus.com/Motherboards/AMD...us/M5A78LM_LX/
If being desirable, I could buy a Parallel Port Interface Card.
Would appreciate coments about with one could suply better performance.
Thanks.