Machsupport Forum
Mach Discussion => Brains Development => Topic started by: lightntrax on May 30, 2012, 03:05:38 AM
-
I am thinking about using an optical sensor to tell my machine that the hole was drilled. I am doing a continuous drill system with a small drill bit. I would like to know that the hole was drill and the bit didnt break off in the hole. This would step through the subroutine in my G Code. Is this possible?
Thanks. Eddy
-
Eddy - please do not cross post - especially numerous times. you already have an active thread for this here http://www.machsupport.com/forum/index.php/topic,20499.msg142371.html#msg142371 (http://www.machsupport.com/forum/index.php/topic,20499.msg142371.html#msg142371)