Machsupport Forum

Mach Discussion => Mach Screens => Screen designer tips and tutorials => Topic started by: lightntrax on May 30, 2012, 01:02:04 AM

Title: Counter Readout
Post by: lightntrax on May 30, 2012, 01:02:04 AM

I would like to have a counter for every hole that has been drilled.  I have a basic system that drills hole on a continuous ribbon of brass.  I would like to know how many holes have been drilled so I know how dull the bit might be getting.  I would reset it at the time of changing the bit.

Thanks.  Eddy

Title: Re: Counter Readout
Post by: stirling on May 30, 2012, 03:23:43 AM

Eddy - please do not cross post - especially numerous times. you already have an active thread for this here http://www.machsupport.com/forum/index.php/topic,20499.msg142371.html#msg142371 (http://www.machsupport.com/forum/index.php/topic,20499.msg142371.html#msg142371)