Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: merlinhawker on May 26, 2012, 05:29:22 PM
-
Hi All, My name is Mark and I live in Tucson Arizona. I have a 4' x 4'
cnc router I believe its a Private made or home built machine that is using
Keling Technologies nema 23 H2100-30-4B stepper motors and Keling microstep drivers KL-5042 with Sound Logic breaker board.
The problem is (and I have been using this machine for a year, without incident) is that today when It cuts a part it goes the wrong direction in
the X axis only and only about half the time. Kind of it or miss. I tried
swapping motors with the same result and swapped out the drivers with the
same result. Checked all wires for tightness. and havent a clue what to do now. when moving in the X axis with the keyboard if I press left it goes left
stop and press left again and it goes left stop and press left again and it goes
Right. Hmmm. There seems to be no pattern I can discern. I am a woodworker
by trade and not a computer guy or a machine fix it guy. A newbie...
Any Ideas?? or is there anyone near Tucson, can and will be happy to pay for help.
Also I am using mach 3 with a computer running XP
any help greatly appreciated.
-
Answered in your other post, please try and only post once and continue conversations in the one thread.
Hood
-
thanks Hood, I dont know the mach 3 came with the machine. Sorry about double posting, I am new to this, and thought it hadn't worked.
Any way to find out about the possible pirate version? Mark,
-
Assuming its a fairly recent version of Mach there will be either Demo or a name displayed at the top of the screen when you open Mach. If its a name what is it, you can PM me the name if you dont want to post it here.
Hood