Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Fred_evans on April 28, 2012, 09:24:17 AM

Title: opening an m1s file
Post by: Fred_evans on April 28, 2012, 09:24:17 AM
Hello Jimpinder--
I am trying to figger out macros and I came across some replies of your which included
the following files

m202.m1s

1024.lset

m201.m1s

Please tell me how to open and use these files
Many thanks

fred evans
Title: Re: opening an m1s file
Post by: RICH on April 28, 2012, 06:33:50 PM
Hmm....haven't heard from Jimpinder in some time........

- 1024.lset is a standard "screen set" for the lathe ulness Jimpinder modified one with the same number  ???
- m202 & m201.m1s are macros and can be called from within a program file or via the MDI line.

On the top of the screen select Operator> VB Script Editor then select the macro and you will be able to see the coding if so desired.
 

RICH
Title: Re: opening an m1s file
Post by: Fred_evans on April 29, 2012, 07:27:20 AM
thanks rich-- will try it tomorrow at work

regards

fred
Title: Re: opening an m1s file
Post by: ger21 on April 29, 2012, 07:38:47 AM
You can also open .m1s files in any text editor. Notepad, Worpad, Word, ....