Machsupport Forum

General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: Mad Welder on April 28, 2012, 08:05:25 AM

Title: Model Epiphone acoustic guitar
Post by: Mad Welder on April 28, 2012, 08:05:25 AM
Hi all,

I made this little guitar for my Nephew who's eighteen today, it's made from Aluminium and I polished the finished model with a similar technique as Stainless polishing...this is my first time polishing Aluminium and wasn't sure of the result but there's no difference really to polishing Stainless....I drilled and tapped M3 Allen cap screws as the tuning screws and you can see the end result......


Also I could sure do with advice with a topic I raised here http://www.machsupport.com/forum/index.php/topic,21435.0.html (http://www.machsupport.com/forum/index.php/topic,21435.0.html) and thanks in anticipation.....



(http://www.cnczone.com/forums/attachment.php?attachmentid=158428&d=1335395042)
(http://www.cnczone.com/forums/attachment.php?attachmentid=158429&d=1335395042)
(http://www.cnczone.com/forums/attachment.php?attachmentid=158431&d=1335395042)
(http://www.cnczone.com/forums/attachment.php?attachmentid=158581&d=1335566792)
Title: Re: Model Epiphone acoustic guitar
Post by: RICH on April 28, 2012, 08:47:14 AM
Nice project and hope he appricates it.
RICH
Title: Re: Model Epiphone acoustic guitar
Post by: Sam on April 28, 2012, 11:37:42 AM
Nice indeed! Definitely allot of time went into it. Thank you for snapping some pics to share with the rest of us.
Title: Re: Model Epiphone acoustic guitar
Post by: Mad Welder on May 01, 2012, 02:40:28 PM
Yup he loved it and it isn't often you see the whites of someones eyes when they're surprised ha....

it's the little things that count and make it all worth while......

Eoin
Title: Re: Model Epiphone acoustic guitar
Post by: Fastest1 on November 11, 2012, 10:44:57 PM
Very nice.