Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: geeksrus on April 27, 2012, 11:52:00 AM

Title: Macro option on Operator menu
Post by: geeksrus on April 27, 2012, 11:52:00 AM

I don't have a Macro option on the Operator drop down menu as described in my Mach3 manual (Mach3Mill_1.84.pdf, pg. 10-34).

Title: Re: Macro option on Operator menu
Post by: BR549 on April 27, 2012, 03:46:12 PM

Wha you use now is the operator / VB script editor.

(;-) TP

Title: Re: Macro option on Operator menu
Post by: geeksrus on April 27, 2012, 05:53:28 PM

Thank you for the response. I suspected that was the case but wanted to make sure I wasn't missing a feature.