Machsupport Forum
Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: zafarsalam on April 21, 2012, 09:25:07 AM
-
Has anybody tried this product. Views, pros, cons?
http://www.ebay.com/itm/CNC-3-Axis-USB-HandWheel-MPG-Pendant-Pulse-Generato-Mach-3-Engraving-Router-/251036884197?pt=LH_DefaultDomain_0&hash=item3a72f6dce5
Zafar
-
Has anybody tried this product. Views, pros, cons?
http://www.ebay.com/itm/CNC-3-Axis-USB-HandWheel-MPG-Pendant-Pulse-Generato-Mach-3-Engraving-Router-/251036884197?pt=LH_DefaultDomain_0&hash=item3a72f6dce5
Zafar
Hello. I have and use that Pendant. MANY pro's very few cons. I couldn't live without it now that I have one. If you have any questions, you can ask me.
-
I am busy with a few other projects. I'll try this one a few weeks later. Will sure ask your advise for it's setup when I get one in my hand.
Zafar
-
I got this pendant .It works good but Mach3 menu functions slow down when it is connected.
-
I got this pendant .It works good but Mach3 menu functions slow down when it is connected.
That's true, but if you open a Mach3 menu window (such as homing/limits, backlash comp, motor settings etc) and press a button on the MPG Pendant (I use the YES and NO buttons on the top left) the menu will pop up immediately.
-
Hi,
is it has the same menu issue wireless and USB?
-
Hello,Mr Zafa,
This Mach3 wireless electronic handwheel was made by us. This is Alex He from ChengDu XinHeCheng Technology Co.,Ltd
And you see XHC is the from "XinHeCheng" first letter.So we are factory.
Leave your email address and 2015 new version Mach3 usb cnc pendant will be sent.
-
Here are my contact information for more people.
Email: xhctech-alex@hotmail.com
Tel/What's app: +86-13568946750
Skype: alex86he
-
Hello,Mr Zafa,
This Mach3 wireless electronic handwheel was made by us. This is Alex He from ChengDu XinHeCheng Technology Co.,Ltd
And you see XHC is the from "XinHeCheng" first letter.So we are factory.
Leave your email address and 2015 new version Mach3 usb cnc pendant will be sent.
Hi Alex,
Nice to see the manufacturer's representative here. I got one of your wireless pendants from a friend who bought it on aliexpress.com. I have tried it on my machines and found it very useful. The response is a little slow, but it is bearable. I wish to have one with 6 axis support.
Zafar Salam
-
Hello, Mr Salam.
Glad to hear that you are on the market fo Mach3 wireless handwheel WHB04-L.
Till now, for handwheel, we have only support 4 Axis for this model No WHB04-L with LCD display
-
Leave me your email address, i can send you a catalogue and our price list to know us more.
-
Hey Alex,
Any chance there will ever be a xhc whbo4 pendant plugin for mach4? I have a pendant and it works great with mach3.... but I'm switching to mach4 now and would to still like to be able to use my pendant.
-
Sorry, Patton. Till now, Mach4 is developing.We are trying to make it. Please be patient. If there is anybody who need Mach3 pendant. please recommend our products to them, thank you, sir.
-
Hello, Mr Salam.
Glad to hear that you are on the market fo Mach3 wireless handwheel WHB04-L.
Till now, for handwheel, we have only support 4 Axis for this model No WHB04-L with LCD display
Alex,
Your website shows a pendant PHB04-6 which can handle 6 axes. Is it available?
Zafar
-
Hello, Mr Salam,
This PHB04-L is not common one. This one belong to Customized product. It is for these factory who have independent system develop ability, and this pendant can use for it's own system.
-
hi all
i have xch wired mpg.
-
Our New Generation Mach3 Handwheel will start to sell on the market from March.
Compare with WHB04-L, it is named WHB04B.
Anybody who wanna to know more, kindly send me email via xhctech-alex@hotmail.com
-
hi ,dear alex , I want gives me the information of their products. I bought one in AliExpress (L hb-04) and I was fine until failure. now I need to replace it with another very urgent, you have a store in aliexpress. in any case what are your prices? I await your response as soon as possible.
-
Hello!
Hope somenone stil notices this post.
I have wireless HB04 pendant used with Mach3 and I ran into some trouble.
1. First of all, after setting custom buttons only few of them remain working after restarting Mach3.
I have to go every time into plugin config, select Shuttle plugin and there just click OK (without changing any settings) and custom buttons work again. This is quite annoying for the customer. The problematic functions are in my case "Slow Jog % Up" and Slow Jog % Dn". Same for Feedrate increase/decrease function and many more.
On the other side, calling macro #3 works every time.
2. Another issue is with "Rapid Axis ++" and "Rapid Axis --" functions when I try to use them as custom button. They seem to have no acceleration/decceleration and they use some unknown speed which is too fast for the machine.
What I am trying to do for my customer is to have two buttons he can use for long fast moves instead of scrolling the wheel like crazy.
Can anyone help me out with those troubles? I am using plugin version 3.6.1.
Best Regards,
Alex
-
Dear Alex,
Thanks for your feedback about these issues.
I have sent it to our after sales engineer.
If there is any update, i will let you know
Regards
Alex He
-
Thank you for the reply.
Please try to find a solution at least for custom buttons, this one is very annoying.
I am using clean install of Windows XP and Mach3 with no other programs running.
Best Regards,
Alex
-
Any progress with the mach 4 software? I have 2 of your pendants and they work great but I want to change over to Mach 4
-
Here are my contact information for more people.
Email: xhctech-alex@hotmail.com
Tel/What's app: +86-13568946750
Skype: alex86he
Hello Mr Alex,
I use WHB04 , all worked very well.
I offer my customers to use it.
And one of them says, the shuttle mode can not be used.
Can you help solve this problem?
thank you
Nanda
-
Has any fix been found for the "Rapid Axis ++" and "Rapid Axis --" issues? I have same problem.
-
Hello again!
By now 2 wireless units have died. First unit after more than a year of use in normal workshop environment, second unit after 8 months of very careful use in clean environment.
Same symptoms: after power-up, battery LED flashes once, LCD breifly flashes all the digits, after that LCD remains blank and none of buttons respond.
This is becoming very bad now as I have bought the second unit already on my costs. What is the warranty time for this unit and what can we do in that case?
Second unit was bought on Tue, 22 Jan 2019, died last week.
Are there any trustworthy wireless MPG alternatives?
Best Regards,
Alex