Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: p38nut on April 19, 2012, 12:51:44 PM

Title: Rotary axis
Post by: p38nut on April 19, 2012, 12:51:44 PM

What are the keyboard keys for A+ and A-?  Scan codes appear to be 45,46.  Thanks.  Mike

Title: Re: Rotary axis
Post by: Hood on April 19, 2012, 02:02:32 PM

I dont think there is such a thing as a standard setup for A axis but if yours is set to 45/46 then that is Insert and Delete keys on the numeric pad of my keyboard.
Hood

Title: Re: Rotary axis
Post by: p38nut on April 19, 2012, 03:29:41 PM

I will try that later on tonight.  Thanks you for your quick response.  4th axis(A) is sure a new learning curve.  Thanks again.  Mike

Title: Re: Rotary axis
Post by: p38nut on April 20, 2012, 08:52:54 AM

That worked.  Also found in the motor cable I had used blue wire on one end and green wire on other end.  Works wonders now that both phases are connected.  Guess my vision on colors need tuning.  Thanks.  Mike