Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: spr203 on April 18, 2012, 03:30:43 PM

Title: just finished up refitting old cnc with new electronics
Post by: spr203 on April 18, 2012, 03:30:43 PM
i want to first say thanks to steve at PMDX he was more than helpful with questions . his breakout board is easy to hook up and runs great with mach 3 . i used his 126 board with a 107 to control my vfd . i am suprized at how repeatable this system is with out encoders . once again thanks
Title: Re: just finished up refitting old cnc with new electronics
Post by: Hood on April 18, 2012, 05:36:56 PM
PMDX BOBs are definitely top class.
Hood