Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Libbit on April 17, 2012, 02:58:34 AM

Title: Setting up a spindle...... (again)
Post by: Libbit on April 17, 2012, 02:58:34 AM

Hi, I have this 24000 RPM China spindle. I had it working sort off??? The PMDX-107 card was faulty and was replaced. Now i have s100 (Min 120hz) = 7200RPM and S1000(400Hz) = 24000RPM. Reading up and trying to understand the spindle and pulleys, changing the pulleys, changing the Spindle motor setting just does not make, again, sense. Pls help??? Tks John