Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: OTB on April 14, 2012, 03:31:07 PM
-
I am new here and was wondering if there is a wiki or guide that shows how to setup the IMS post processor in catia v5. I have managed to get apt files and with further tampering I finally got it to spit out n-codes but it is still fishy. Any help is appreciated. Thanks guys.
-
Have you tried posting on the IMS site?
RICH
-
You can use the Formatter Utility to tweak some aspects of the library 3 axis posts.
I have attached the IMS CATIA V5 document.
If you have any further questions let me know.
support@ims-software.com