Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: johnmb1946 on April 14, 2012, 02:29:50 PM

Title: probe using fixed plate and movable touch plate
Post by: johnmb1946 on April 14, 2012, 02:29:50 PM

Hi need help  since instaliling my smoothestepper i dont get the green light which indicates that the touch plate  or fixed plate is working
has anyone experienced the same problem .they worked okay when using parallel port im using machstdmill  screenset also use 2010 screenset
any help would be appreciated
john