Machsupport Forum
Mach Discussion => FAQs => Topic started by: ped8015 on April 10, 2012, 01:55:17 PM
-
Hey all,
From reading the topics my request seems very doable but I have yet to make it work.
Goal: I would like one input (from a button) to toggle the active axis (alt-a) for my single MPG. So I would like to use a single MPG to control axis X-Y-Z.
I am using an MPG that works well. I can select the axis by using Alt-A. I have an input that works well and I have tested it with other tasks.
What I have tried:
Go under inputs and selected my input as input #1 (it shows up under diagnostics) then the hotkey is 2145 for Alt-A.
This does not work.
Please let me know what I am doing wrong.
-
Use an OEM Trigger set to 175 instead.
Russ
-
SWEET!
thanks it worked.
Phill