Machsupport Forum
Third party software and hardware support forums. => Promote and discuss your product => Topic started by: purelogic on April 10, 2012, 10:20:02 AM
-
Welcome to discuss!
Interface: STEP/DIR/ENABLE
Max. freq: 100KHz
Size: 86x82x20
Pins: 3 ports (same to standard LPT ports), 36 "out" and 15 "in". All ins and outs are buffered.
Site: http://plmotion.com
(http://plmotion.com/netcat_files/1.jpg)
Features:
Ethernet(using TCP/IP) or USB Full-speed connection
Up to 6 axes, 100kHz pulsing engine
PWM spindle control
Probing
Torch Height Control
Slave Axis support
Soft limits
Easy firmware update
DB25F connector to reproduce standard LPT connection
DLL for direct access to controller could be provided
Power supply 5Vdc or USB
Power-over-Ethernet(optionally)
-
(http://www.purelogic.ru/pl_ebay_2.jpg)
-
English manual is here (http://purelogic.ru/doc/PDF/Controller/english/plcm-e3.zip): http://purelogic.ru/doc/PDF/Controller/english/plcm-e3.zip
Our Forum (http://www.purelogic.ru/Forum/viewforum.php?f=59) (we can speak english there)
Small related video (http://www.youtube.com/watch?v=3Gi2B2qUJ_k). (sorry, Russian only)
-
Purelogic Wiki pages (http://translate.google.com/translate?sl=ru&tl=en&js=n&prev=_t&hl=ru&ie=UTF-8&layout=2&eotf=1&u=wiki.purelogic.ru/index.php/PLCM&act=url)(google translate Ru -> En)
-
we've opened English forum (http://plmotion.com/Forum_eng/)
-
Purelogic RnD on the "Metalloobrabotka-2012" (http://www.metobr-expo.ru/en/list_2012/) Exhibition
On this fair(one of the biggest in Europe) we've introduced some new products:
CNC pendant PLCM-R1 with Ethernet support for Mach3.
new breakout board PLC4x-G2
milling machine PLRA1-RG
etc.
(http://purelogic.ru/TEMP/effdvvvb4.jpg)
(http://purelogic.ru/TEMP/rr45533.jpg)
(http://purelogic.ru/doc/PDF/Controller/PLCM-R1.jpg)
-
Purelogic PLCM-E3 on the eBay:
CNC Mach3 motion controller Purelogic PLCM-E3p, USB / Ethernet, 6 Axis, PoE (http://www.ebay.com/itm/CNC-Mach3-motion-controller-Purelogic-PLCM-E3p-USB-Ethernet-6-Axis-PoE-/140767298882?pt=LH_DefaultDomain_0&hash=item20c6628542)
-
Engraving and milling with PLCM-E3.
All machines are connected to PC by Ethernet
http://youtu.be/VzHHDjothhk
-
Our customer shared video with plasma cutting using PLCM:
THC - YouTube (http://www.youtube.com/watch?v=tAzWFGxnh8g)