Machsupport Forum
Mach Discussion => FAQs => Topic started by: rbocaz on April 02, 2012, 04:09:06 PM
-
I had to make a fresh installing of MACH3. But with jogging axis Z keys UP and DOWN make Z go up.
hotkeys for Z are 33 and 34
Any help appreciated
Rick
-
Either you have a loose connection on the Z Dir wiring or you have the Z Dir assigned incorrectly.
Hood
-
Z dir is ok. I tried reinstalling Mach3 and it worked fine.
Thanks anyway.
-
Yes I had the same issue. Thought I was going crazy. Reinstallation worked
-
im having a similar problem
im using a bunch of cnc4pc boards with all rj45 connections
X and Y were giving similar problems and i messed around with the cables and fixed them
i got z to go + and - at some point but it wont do it consistently
i made 3 or 4 new cables and im still having the problem
yet X and Y are still fine
hellllllppp!!!!
-
ill try the reinstall today and see how it goes
if it doesnt work ill post again and see if anyone has any more ideas