Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Libbit on March 20, 2012, 03:38:18 PM

Title: Motor Home/Soft Limits.
Post by: Libbit on March 20, 2012, 03:38:18 PM

Hi guys,

I know this is an old topic but pls feel for us newbies..... ??? ???

My home build CNC router has a table size of 1400 x 1400 x 150. The question i have is do I set-up my Soft Limits as x-min = 0 and x-max =1400, y-min = 0 and y-max = 1400, with z-min = 0 and z-max = 150.

Rgs, John

Title: Re: Motor Home/Soft Limits.
Post by: Hood on March 20, 2012, 04:18:14 PM

Normally Z Max is 0 and Z Min is -150

Hood

Title: Re: Motor Home/Soft Limits.
Post by: Libbit on March 20, 2012, 04:41:11 PM

Hey Hood, tks.