Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: juandres666 on March 18, 2012, 02:42:05 PM
-
I have Mach 3, it is working with AJAX CNC and ethernet plugin. I do know if I can to use the parallel port.
The mach 3 is using AJAX PLUGIN. Can I work with another plugin? I need to use parallel plugin too.
Thanks in advance.
-
The parallel port driver is not a plugin so afraid you can not use it with the Ajax, its one or the other. If needing more non time sensitive I/O then maybe look at a PLC or the PoKeys.
Hood
-
The parallel port driver is not a plugin so afraid you can not use it with the Ajax, its one or the other. If needing more non time sensitive I/O then maybe look at a PLC or the PoKeys.
Hood
How can I work with AJAX and parallel port?
-
You cant.
Hood
-
You cant.
Hood
I am needing to work with time sensitive I/O, it is for my rotary table (4 axis). It has stepper motor and driver with Enable, Direction and Step inputs. How can I do to work?
-
Can you not connect to the Ajax?
Hood
-
Can you not connect to the Ajax?
Hood
no, because ajax has pcb tarjet for servo motor, my rotary table has stepper motor.
-
Then afraid you can not use.
Hood
-
Then afraid you can not use.
Hood
:'(
Do you have any idea about how I can develop or design any interface for my problem???
OR
Do you know any software engineer that he can help me?
thanks!
-
Easier to get a servo for the rotary axis I would think.
Hood
-
Easier to get a servo for the rotary axis I would think.
Hood
I dont have some money.... What can I do?
-
Easier to get a servo for the rotary axis I would think.
Hood
Can you help me please?
-
Afraid I cant.
Hood