Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Things on March 17, 2012, 09:58:48 AM
-
Hey guys,
I'm trying to make some little keychains on my laser cutter. I have my design in a dxf file, with both the outline and text in it.
What I'm trying to figure out, is how I can tell lazycam to raster the text, and cut the outline? Is there a way to do this in lazycam? I had a look at the manual but oculdn't really find anything specific about it.
Cheers,
Dan
-
Sorry for the double post. I was just looking around in lazycam and found the pocket tool. Would it be possible to select my shapes and turn them into pockets? If I use a super tiny tool diameter, can I have it so it will cover the entire area of the shape?
Cheers,
Dan
-
Would it be possible to select my shapes and turn them into pockets?
Yes, see the manual on how to do.
If I use a super tiny tool diameter, can I have it so it will cover the entire area of the shape?
Yes, when you pocket the defined shape.
how I can tell lazycam to raster the text, and cut the outline
Sorry, Lazycam is not a CAD program.
RICH