Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: KNS Supply on March 14, 2012, 11:58:58 PM

Title: Can Mach 3 Mill put on a Kitamura Mycenter1?
Post by: KNS Supply on March 14, 2012, 11:58:58 PM

Can Mach 3 Mill put on and used on a Kitamura Mycenter1 VMC?

I use it on my mill everyday that I built from a old Wells Index, but that's a home made machine.

The control on a machine does not work.

Please let me know.
TIA

Title: Re: Can Mach 3 Mill put on a Kitamura Mycenter1?
Post by: Hood on March 19, 2012, 06:34:48 AM

You would either need to get drives that can accept Step/Dir or use one of the controllers compatible with Mach that can send out analogue signals to the amplifiers.
Such devices are DSPMC, Galil, Kflop/Kanalog combo, CSMIO/IP-A

Hood

Title: Re: Can Mach 3 Mill put on a Kitamura Mycenter1?
Post by: KNS Supply on March 19, 2012, 09:17:43 AM

Interesting, cool thanks for the info.....