Machsupport Forum
Mach Discussion => Mach Screens => Topic started by: dcs on January 03, 2007, 02:34:15 PM
-
Hi
I'm putting toghether a simple screen and I have a Jog on/off button, which does work. I also have an LED which is tied to OEMCode 84, so it should go on/off with Jog mode, but it doesn't. Its always off regardless of jog on/off mode. Am I overlooking something or what??
I can post a copy of the screen when I get it done.
-
Hi,
Try 103 for the button and 83 for the led. 84 is the CV feed enabled led.
Check the Mach Wiki for the lists of buttons, leds, etc. ;)
Regards,
-
Yep that did it! ;D I was using the list of OEM codes from a mach2 manual.