Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dwneumann on March 11, 2012, 07:33:08 AM

Title: Manual Limit Override won't shut off??
Post by: dwneumann on March 11, 2012, 07:33:08 AM
I am trying to figure my problems out before posting questions, but I am having a heck of a time trying to figure out why the Manual Limit Override LED is on and why it wont turn off.
My machine co-ordinates (X,Y,Z,A) are all well away from their soft limit ranges, diagnostics screen shows none of my home switches are triggered,  I have pressed RESET and tried to jog further off (I can in fact jog all axes).

I have tried disabling soft limits altogether, I have tried disabling Auto Limit Override....
I have tried exiting and relaunching Mach, rebooting the computer,  even downgrading to the lockdown version of Mach3.  It still loads with the Manual Limit Override flashing and won't shut it off.

I am using R3.043.058 with SmoothStepper v17efb.  My settings XML file is attached but renamed with a .txt file extension.  A screen capture of my co-ordinates & diag screens are also attached.
Any ideas what's going on here??
thanks.....