Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: i_r_machinist on March 03, 2012, 05:08:41 PM
-
Machine has been and running great with 4th axis. Turned it on today and I get incremental movement on the a (4th) axis. I give it a a command and the rotary head doesn't have a fluid movement to that position, just a jerky move a couple of degrees, dead stop, repeat until A position reached. Even in G1. I don't remember changing any parameters.
Any Help?
i_r_
-
If you attach your xml I will look see if there is a problem with it. Do the DROs show the jerky movement?
Hood
-
Yes,
The control seems to be sending out pulses of movements. I can manually move the a axis and it is as smooth as butter. This just started. Do I just search for a .xml file?
thanks
Kerry
-
Open Mach and look lower right for the name of the profile you are using then look in the mach folder for a file of that name with an xml extension.
Hood
-
Lets see if this works.
-
Try setting your kernel to 25KHz and restart Mach and see if that helps.
Hood
-
Thanks Hood!
That did it.
have fun
i_r_