Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Picengraver on February 22, 2012, 02:01:43 PM
-
I'm having some error message problems with Ver. 3.043.058 and Mach3 shuts down and want to send a report to MS. I want to revert to Ver. 3.043.057 (need M10/M11 commands), but it does not show up on the FTP site. In fact, lots of later development versions seem to not be there.
Am I missing something?
Regards All,
John Champlain
www.picengrave.com
-
Hi John,
I have uploaded v056, which I am using, here http://www.graytel.talktalk.net/Mach3(056).zip (http://www.graytel.talktalk.net/Mach3(056).zip)
It will only be there for a few days before it is deleted but should give you enough time to get it ;)
Tweakie.
-
Tweakie,
Thanks, Got it. :)
John
-
Tweakie,
Ver. 056 has the same issue on my computer (Win XP - Dell GX-270) as Ver. 058 - it faults with an Art code (?) error message and forces Mach3 to shut down, then wants to send a report to MS.
Earlier versions have never done this.
I will have to investigate further.
Thanks Much,
John Champlain
www.picengrave.com
-
Hi John,
No idea what can be causing the problem - I have not had that error here (yet :) )
Tweakie.