Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: zarzul on January 01, 2007, 12:26:51 PM
-
Hi All,
Just finished my new end groove wizard and thought I would post it to share with you all. I was very motivated, I needed to cut o-ring grooves in the ends of my dive light housing I am working on.
To use it you just unzip it and put it in a subdirectory under the TurnAddons folder, I named mine MY TURN, make sure the bitmaps folder is a sub folder of MY TURN, and your ready to go.
An alternate way, which is how I am doing it, is to use screentweek and append the screens from MY TURN into the fine turn wizards Brian & Kiran made, then go add your buttons on the menu page to select the correct wizard.
The first download is the zipped MY TURN wizard, also attached is a picture of the dive light head with the oring groove cut into the end.
-
Thank you for your work! Love to see people use the power that we have given to you!