Machsupport Forum
Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: gjvander on February 19, 2012, 03:42:52 PM
-
Hi,
I started playing with MachScreen, and can get the DRO, reset etc to show up. When I load in the screen in Mach, and I do reset, I can enter X1.0 and see the DRO respond. I cannot, however, get the arrow keys or number keypad to make the DRO move.
I assume I am doing something simple wrong here?
Regards,
Geo
-
You need a jog on/off button in order to be able to jog.
-
Thanks Gerry, that worked.
Just for completeness:
For Reset Button, I used function "Std Reset", Standard Code 21. Also used LED function "Reset LED", OEM-Code 800.
For Jog Button, I used function "OEM Jog Mode Toggle, Standard Code 103. LED function "Jogging Enabled LED", OEM-Code 83.
Regards,
Geo
-
Sounds like you're using MachScreen? I use Screen4, which uses different terms. In Screen4 it's just called Reset. THE LED is 800.
Jog is 103 with LED 83.
-
Yes, MachScreen.
-
Hi Brian,
Some machine plasma cutting used digital height control for varies high level of metal
Can you show me how to set up on screen to use sensor ?
Thaks
Thuyen