Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: dfurlano on February 17, 2012, 06:21:04 PM
-
Isn't there a way to have the path highlight as you scroll through the gcode in the toolpath window. i look for settings but could not find anything. Thought I did it before but it was a long time ago.
TIA
Dan
-
Similar to this ?
http://www.machsupport.com/forum/index.php/topic,20791.0.html
-
You can also select "Lines from Last to Current" under Config / ToolPath.
This will keep lines highlighted when running the part program.
Russ