Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: John Mac on January 28, 2012, 06:49:41 PM

Title: Rotary table dividing calculator
Post by: John Mac on January 28, 2012, 06:49:41 PM

Hi All
I guess this is decidedly non CNC related however it may come in handy on your manual mill.
It is written in Excel (no macros) you can change it as you wish.
Enter the number of divisions and it will display all the decimal angles together with the same angle in DEG MIN SEC.

http://www.mediafire.com/file/yxheh2nvg2h3q7j/Dividing Calc 1.zip (http://www.mediafire.com/file/yxheh2nvg2h3q7j/Dividing Calc 1.zip)

Cheers
John

(http://www.mediafire.com/imgbnc.php/5ba675411589ec50f00ffa23a4031add64f3476bc00bb459a42a89dda3338b3f6g.jpg)

Title: Re: Rotary table dividing calculator
Post by: Sage on January 28, 2012, 08:02:19 PM

Thanks John:

I'll give it a try. Could be useful even for manual CNC usage.

Sage