Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: RICH on January 21, 2012, 10:15:02 PM

Title: MACH3 MANUAL UPDATES
Post by: RICH on January 21, 2012, 10:15:02 PM

I just updated "Threading On the Lathe - Mach3 Turn" write-up which is located in Members Docs.

The link in Support>Documentation / Mach3 takes you to Rev 0 of the document and it is now at Rev 2.
Can someone fix that link?

Thanks,
RICH

Title: Re: MACH3 MANUAL UPDATES
Post by: scottn on January 22, 2012, 01:18:03 PM

Done!...

scott