Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: super61 on January 20, 2012, 02:07:10 AM

Title: Mach 3 not loading the entire toolpaths!!!
Post by: super61 on January 20, 2012, 02:07:10 AM
Hello,

Whenever I try to import a toolpath to Mach 3 it will only generate part of it! I have tried exporting the toolpath on different formats but no luck. It used to work fine, but this problem surfaced a week ago and I do not know how to fix it. Since only part of the toolpath is generated it is not completing the run. It seems to only happen with 3d relief rastering or z roughing. Other operations work fine.....

I use:
ArtCam Pro 8
Mach 3.043
Windows 7
The PC is a Core Duo with 4GB of Ram.

Any help is appreciated.
Title: Re: Mach 3 not loading the entire toolpaths!!!
Post by: Hood on January 20, 2012, 03:17:34 AM
If your code is more than 500 lines you either do not have a licence or it is not installed correctly or lastly the licence you have is a pirated licence.
Hood