Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Montezuma213 on January 17, 2012, 12:20:42 AM

Title: PCIe Parallel Card having problems.
Post by: Montezuma213 on January 17, 2012, 12:20:42 AM

When I connect to my gecko g540 to my PCI Express Parallel Card PEX1P, I cant seem to get my relay to work for my router plugin. I can get everything else moving except my 12volt relay for my router.

Anyway, is there something I should know about using a PCIe Parallel card with Mach3? If I connect it to any other PC with a parallel port that isn't PCIe it works fine. Any ideas?