Machsupport Forum

Third party software and hardware support forums. => SmoothStepper USB => Topic started by: bluewave65 on January 11, 2012, 10:20:43 AM

Title: Why Smoothstepper made a pause between commands ?
Post by: bluewave65 on January 11, 2012, 10:20:43 AM
Hi everybody,

i got a problem with smoothstepper and mach .....

if i send to SS these :

G1 X49.914 F10000
G1 X49.914 Y0.042

He made a pause between them .......

How can i fix it ?
Is it possible ?
Title: Re: Why Smoothstepper made a pause between commands ?
Post by: Hood on January 11, 2012, 11:40:06 AM
If it just a momentary pause it would seem you are in exact stop mode (G61) Change to Constant Velocity mode (G64) and see if that helps.
Hood
Title: Re: Why Smoothstepper made a pause between commands ?
Post by: bluewave65 on January 11, 2012, 12:36:20 PM
That`s the problem :    I`m not in exact stop mode ............
Title: Re: Why Smoothstepper made a pause between commands ?
Post by: Hood on January 11, 2012, 02:25:13 PM
Can you attach your xml and also the code that you are using and is it between all lines of code or just specific ones? Also is it just a momentary pause or is it longer?
Hood