Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Len-Tikular on January 09, 2012, 03:30:56 PM

Title: Axis not reffed
Post by: Len-Tikular on January 09, 2012, 03:30:56 PM

I'm not sure if I'm in the correct area here but maybe someone can help me.
My screen shows "AXIS NOT REFFED TO NORMALL CONDITIONS'

I have inductive proximity switches on all 3 axis. (but only at one end) They work fine. I can home and ref to them all no problem. I'm just not sure what the error message means.

My machine works fine and has been for quite some time. Clearly I have something in my setup wrong.

Thanks in advance.

George

Title: Re: Axis not reffed
Post by: Hood on January 09, 2012, 04:56:10 PM

Are the LEDs at the side of the axis green?
Hood

Title: Re: Axis not reffed
Post by: Len-Tikular on January 10, 2012, 01:10:30 PM

Yep!

Al 3 boxes X,Y and Z are Green.

Cheers

George

Title: Re: Axis not reffed
Post by: Hood on January 10, 2012, 01:45:33 PM

Then if everything is as it should be just double click the abnormal condition and tell it that is actually a normal one :-)
Hood

Title: Re: Axis not reffed
Post by: Len-Tikular on January 12, 2012, 06:38:00 AM

That seemed to do the trick, many thanks  ;D