Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: vail101 on January 07, 2012, 05:07:44 PM

Title: Machine wiring,estop
Post by: vail101 on January 07, 2012, 05:07:44 PM
Im retrofitting milltronics partner 7 , using original servo drives,and spindle drive , using galil dmc1842 ,icm2900 opto ,my first question estop is in line with overtravel switchs , it originally shut down the drive power,coolant  and spindle. is this the direction i should follow. originally bought camsoft package but they want 1500.00 for license fees to give help since i left this project set for 2 yr. now i think about using mach3 to control galil 1842 directly or through icm2900.
can anyone give me some direction to begin. thankyou john ??? ??? ???
Title: Re: Machine wiring,estop
Post by: Hood on January 07, 2012, 05:13:25 PM
I do it that way and have a button on my panel that links out the open switches lack of signal so that I can enable Mach again and jog off the switches.
Hood