Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bill_O on January 03, 2012, 08:15:30 AM

Title: rapid jog
Post by: Bill_O on January 03, 2012, 08:15:30 AM
I have a custom screen set with the x, y and z jog buttons on it.
I have the buttons set up to use the arrow keys on the keyboard.
Using the arrow keys the axis' move at the slow jog speed.
If I then use the shift key and the arrow key I get no movement.
If I use the shift key and click on the screen with the mouse I get rapid movement.
What am I missing to make the rapid move work with the arrow key?

Thanks,
Bill
Title: Re: rapid jog
Post by: Graham Waterworth on January 03, 2012, 09:12:22 AM
Have a look at the button list you may have the wrong button code entered.

http://www.machsupport.com/MachCustomizeWiki/index.php?title=OEM_Buttons
Title: Re: rapid jog
Post by: Bill_O on January 03, 2012, 09:33:30 AM
Graham,

I am using the correct codes. I did check to make sure. I always assume I messed up. LOL
The arrow keys work for the slow jog speed but the shift + arrow key gives me no movement.
If I use the 1024 screen set it works.
I know I am just missing something.

Bill