Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Fred_evans on December 23, 2011, 04:11:33 AM
-
Mach3 turn
Having used a wizard to set up a turning job--
can I "save as" ( to a descriptive file-name ) that set of data?
Thank you
Fred
-
Yes
Hood
-
You can save the GCode to a file by editing it and using "Save As..."
-
thanks on both replies
will try and do this as i have plenty of repetitive jobs-
differing only on tyhe starting diameter point of the y axis