Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Sambonnie on November 14, 2011, 06:18:30 AM
-
Hi Guys,
I am wanting to machine some cornice out with my cnc machine, I have drawn a creoss setion and a3d veiw of this.
I am strugging to get artcam 2008 to import my drawing from autocad in 3d.
the 2d i was hoping i could just extrude the cross section then change the face represent the base so to speak
all help and advice greatly received.