Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: leozalewski on November 11, 2011, 07:30:46 PM

Title: Emulated Inputs with Pokeys
Post by: leozalewski on November 11, 2011, 07:30:46 PM
Hi

Got pokeys working with a 5 by 7 keyboard
Using some emulated keystrokes with OEM triggers
Set up pokeys to produce a oem triggered input (same character on up and down key)
When I build a brain the triggered input goes active and stays there, it never goes inactive
From the Mach manual it states that on the down-key message the input goes active then on the up-key message the input goes inactive

Seem to be missing the up-key message

Any suggestions?
Or is the another method to get the Pokey keys strokes in Brains

Regards
Leo
Title: Re: Emulated Inputs with Pokeys
Post by: Hood on November 12, 2011, 04:08:13 AM
Use the PoKeys as digital inputs rather than emulated keys.
Hood