Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Doreward Hall Granite on October 17, 2011, 03:47:04 PM

Title: Scandinvent C4 cnc running Mach 3
Post by: Doreward Hall Granite on October 17, 2011, 03:47:04 PM

Hi.
I have a granite and marble company and have recently purchased a 2nd hand Scandinvent C4 CNC machine. Unfortunatley I am struggling to find anyone/info that will help me run the machine. The machine came with an instructors manual and the boys in the yard have managed to cut out a few sinks but have come across several stubbling blocks along the way i.e Tool tables, g-codes and scaling. I have looked on the internet for advice but can't seem to find anything. What i am looking for is someone who can spend a day or two, to show the full working capabilities of the machine to the boys in the yard. Any feedback will be much appreciated.

Title: Re: Scandinvent C4 cnc running Mach 3
Post by: Tweakie.CNC on October 18, 2011, 02:19:44 AM

Why do you make an identical post ??

http://www.machsupport.com/forum/index.php/topic,19718.0.html

Tweakie.

Title: Re: Scandinvent C4 cnc running Mach 3
Post by: Hood on October 18, 2011, 06:57:55 AM

Does this machine run Mach?
Hood

Title: Re: Scandinvent C4 cnc running Mach 3
Post by: Doreward Hall Granite on October 18, 2011, 09:49:22 AM

Yes it does?

Title: Re: Scandinvent C4 cnc running Mach 3
Post by: Hood on October 18, 2011, 11:33:01 AM

What issues are you having?
Are you using CAM or just hand coding?
Hood

Title: Re: Scandinvent C4 cnc running Mach 3
Post by: houseofstone on June 08, 2012, 05:56:56 AM

Hi,
we have recently bought a second hand Scandinvent C4 CNC machine, unfortunately it appears to have lost all its ports and pins settings? Does anybody have any knowledge of this machine that would be able to help? it is running mach 3 controller. Any advise would be greatly appreciated.
many thanks
Carl