Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: LowryIndustries on October 10, 2011, 02:59:56 AM

Title: Generic Mastercam X thru X5 POST and much more information posted.
Post by: LowryIndustries on October 10, 2011, 02:59:56 AM

Bunches of real useful information here.
Go to  www.lowrynightsights.com,  then scroll down to the bottom of the page and click on the Bridgeport Manuals link.

Mastercam X thru X5 Post file. Enables the use of the Mach3 Mill tool table on a CNC mill which has no automatic tool changer. I have put some effort into this Mastercam Post, and it should do the trick for most people who have a Kwik-Switch or other type tool changer.

Also have these files and information freely available.

How to convert a Bridgeport Boss 6 to Mach3.
m3.m1s
m5.m1s
macropump.m1s
How to setup a Tool Table and Tool Change in Mach3.
Mastercam 9 to Mach 3 tutorial.
Series II CNC Maintenance Manual.
Series II CNC Operating Manual.
Series II CNC Programming Manual.
SERIES-1-CNC-PROGRAMING-MANUAL.
Bridgeport Series I CNC Program Entries Descriptions.
NC-Programming-Sheet.
Bridgeport-BOSS-G-Codes.
R2E4 CNC.
EZ-FILE.
Student Manual.

Enjoy!

Charles