Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: swanner on October 02, 2011, 09:46:23 PM

Title: Keeping track of machine and tool use
Post by: swanner on October 02, 2011, 09:46:23 PM

Is anything available for mach that lets you keep track of machine hours or distance traveled, what programs are run and when, time and travel of different tools used?

Title: Re: Keeping track of machine and tool use
Post by: Graham Waterworth on October 03, 2011, 08:32:38 AM

Sorry there is no tool life management built into mach3.

Title: Re: Keeping track of machine and tool use
Post by: BR549 on October 03, 2011, 01:17:06 PM

Yes  Machine Hours
Yes  Axis totall distance
Yes # of M3 starts
****Using Mach3 Maintainance window****
Yes WOrklog, including program name,start time end time date, tool changes
Yes tool useage, with Cam support
**** Using CB and Cam****************
Rolling it ALL into a good Tool useage program would be UP TO YOU.

It could be done BUT it is NOT a standard MACH3 function.

Just a thought(;-) TP

Title: Re: Keeping track of machine and tool use
Post by: swanner on October 03, 2011, 03:18:43 PM

I found this thread http://www.machsupport.com/forum/index.php/topic,14864.0.html and it's enough to get me started....but I don't see any of the values in the maintenance window listed as DROs anywhere - am I missing something?