Machsupport Forum

Third party software and hardware support forums. => dspMC/IP Motion Controller => Topic started by: RAYLIU on September 20, 2011, 11:51:37 PM

Title: how to connect between MACH3 and DSPMC/IP
Post by: RAYLIU on September 20, 2011, 11:51:37 PM

I now have MACH3 software, DSPMC / IP, 7535, 7721 and POCKEY55, but I do not have the hardware manual, do not know how to connect, who can help me?



THANKS!
RAYLIU

Title: Re: how to connect between MACH3 and DSPMC/IP
Post by: TOTALLYRC on September 21, 2011, 04:53:03 AM

Go to the Vital systems website and download the manual.

Mike

Title: Re: how to connect between MACH3 and DSPMC/IP
Post by: RAYLIU on September 21, 2011, 07:58:32 PM

Hello MIKE:
I have found their website, but not open their website.Can you help me?



regards,
RAYLIU

Title: Re: how to connect between MACH3 and DSPMC/IP
Post by: Aeroshade on October 10, 2011, 12:02:08 PM

Not sure if you found what you need, but here is a link to that motion card.


http://www.vitalsystem.com/web/motion/dspmc.php