Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: BR549 on September 16, 2011, 11:54:22 AM

Title: ToolComp with fixture offsets OR subs
Post by: BR549 on September 16, 2011, 11:54:22 AM

Hey Andrew could you ask Brian to take a look at ToolComp with subs or fixture offsets. It is seriously broken.

(;-) TP

Title: Re: ToolComp with fixture offsets OR subs
Post by: Riley on September 16, 2011, 09:32:18 PM

I agree that it would be a nice feature to have working! I'm plugging away at a work around  :)