Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: woffler on August 31, 2011, 03:11:25 PM
-
I downloaded the newest lock down version and it is skipping right through a G53Z0 command and a G53 X0Y0 command , i can provide file if need be.
Thank,s
-
Attach the xml and code and I will see if I can replicate.
Hood
-
I keep getting a error message when it try to post with files . Try's to say i already uploaded the file's
-
Ok i renamed them let'see if it takes them.
-
It seems to be the M00 command at the end of the first tool that might be causing it MACH does not like M00! but it should still perform the G93 moves before stopping the program.
-
Remove the ";".
(;-) TP
-
So that's the cause , i will have to find another post p , that does not put that in there or have one modified i may have another i will have to do further testing to see . Thank's Hood
-
......... and thanks to you as well TP, :)
-
The ; is a startpoint for a comment on a gcode line any thing to the right of it is sent to the message bar.
Old school, (;-) TP
-
No problem, glad I was of help ;D
Think you meant to say Thanks Terry.
Hood